GammaScan Fossil Fueled Power Generation

GammaScan Coal Mining

GammaScan Fossil Fueled Power Generation

GammaScan real time data on coal quality provides better control and drives operational decisions regarding the use and management of the resource within coal fired power stations.

Sampling and laboratory analysis only provide a “snapshot” or “average” of the past whilst GammaScan can provide a vision into the future outcomes of coal quality management.

GammaScan’s many practical design features make it by far the simplest Online Coal Ash analyser to install, calibrate and operate.

GammaScan Non Nucleonic Coal Analyzer

GammaScan provides instantaneous, continuous, on-belt CV-in-coal data for real-time process control, rapid Return on Investment through reduced laboratory analysis, and optimisation of plant operation in real time

  • Suited for all coal types
  • No maximum bed depth;
  • Rugged – Designed for harsh environments – mine, washplant, powerplant
  • Non-contact technique – no wear components
  • Low ongoing maintenance
  • SAFE: No Radioactive Sources used; uses the natural radioactivity of the coal
  • 3G interface for comprehensive remote diagnostics by RTI engineers, independent of client IT infrastructure
  • Easy menu driven touchscreen HMI for all setup, calibration, and results
    • No laptop connection required
    • Very easy setup virtually eliminates “set up error” – a major reason for poor performance in other Analysers
    • All standard communications protocols supported. Seamless, hassle-free plant integration

Theory of Operation

The GammaScan Analyser is an on-line “natural gamma measurement system which is easily installed on conveyor belts.

The system does not contain any nucleonic sources and therefore does not require a radiation licence for its use. The GammaScan measures the low levels of naturally occurring gamma radiation in the coal being transported on a conveyor. This radiation mainly arises from elements like U, K, and Th which are naturally present in coal. The amount of these elements present has been shown to correlate well with the amount of the main Ash forming elements (Si, Fe, Al, Ca) and so the gamma count rate correlates to ash content.
By combining the ash measurement with moisture, tonnage and the DAFV (Dry Ash Free Value) of the coal CV can accurately be determined.